Webinar | Eliminate AI Hallucinations in R&D | 20 November; 12 PM ET: Register Now

This startup cuts waste from lead battery recycling by 90%

regenerate technology

Authors

Senior Research Analyst

Summarize this blog post with:

Lead batteries are losing share even in markets they have long owned. In motive power, such as forklifts, lead batteries met 70% of demand in 2024, down from 76% a year earlier, according to the Consortium for Battery Innovation.

Much of a lead battery’s performance comes from its lead oxide, the material that stores the energy. Most of the lead behind it is recycled. Recycling meets about 85% of lead demand in North America. But recyclers turn old batteries into lead metal, and oxide makers then turn that metal into a largely standard oxide. As Dr. Athan Fox puts it, the industry has little precise control over that oxide’s structure.

Regenerate Technology, built on research from the University of Cambridge, is working on that link. It turns spent battery paste straight into lead oxide, skipping the lead metal step, and can tune the oxide’s structure for different jobs. In partner tests, the company reports, blends using its oxide improved energy density by up to 40%.

To better understand how they do it, we spoke with Athan Fox Co-Founder and CTO of Regenerate Technology. This article contains notable highlights from our entire conversation.

This interview is part of our exclusive Scouted By GreyB series. Here, we speak with the founders of innovative startups to understand how their solutions address critical industry challenges and help ensure compliance with industry and government regulations.

“We’re not just recovering materials from waste. We’re changing their structure so they can perform better than the original material.”

 — Dr. Athan Fox

athan fox

Athan Fox holds a PhD in Organic Chemistry and Polymers from Cambridge and completed his Executive MBA with Distinction in 2026, graduating top of his cohort with awards for exceptional academic performance.

He founded Ever Resource in 2020 to develop patented battery recycling technology, then co-founded Regenerate Technology in 2022 to scale that technology globally across lead-acid, lithium-ion, and alkaline batteries. 

How Regenerate Technology’s Hydrometallurgical Lead Recycling Process Works

Regenerate Technology develops recycling processes for lead-acid, lithium-ion, and alkaline batteries, with its most advanced work focused on lead-acid batteries. Its process uses hydrometallurgy to recover the active material from spent batteries and convert it into nanostructured lead oxide for reuse in battery manufacturing. Unlike the conventional route, which reduces lead sulfate to lead metal and then oxidizes it again to make lead oxide, Regenerate is designed to bypass that extra conversion step. The process first produces a metal-organic framework, which is then thermally treated to form lead oxide with controlled surface area, porosity, and crystal structure. These properties can be adjusted for different battery applications, including higher-power automotive batteries and deeper-discharge energy storage systems.

The technology originated from research at the University of Cambridge and has been demonstrated at pilot scale, with front-end processing reaching up to five tonnes per hour. During scale-up, Regenerate developed a separate front-end treatment to handle variations in spent battery paste and produce a consistent feed for its recycling process. The company reports approximately 85% lower carbon emissions and 90% less waste compared with conventional processing. In battery testing, blends containing around 20–25% of Regenerate’s recycled lead oxide have shown up to a 40% improvement in energy density.

With lithium-ion batteries attracting so much investment, why did you decide to work on lead-acid batteries?

Dr. Athan: I don’t see lead and lithium as competing technologies where one eventually eliminates the other. Energy storage will need multiple solutions because different applications have different requirements. Lithium makes enormous sense where high power density and portability matter. Lead makes sense where safety, affordability, established infrastructure, and recyclability matter.

What attracted us to lead was the contradiction inside the industry. The lead-acid battery is highly recyclable, but conventional recycling can still have a substantial environmental footprint. Our chemistry works particularly well with its active material, so we saw an opportunity to improve the recycling process and the material coming out of it at the same time. If we can give lead batteries better performance while reducing the footprint of recycling, they can handle more applications and reduce some of the pressure on more critical resources.

I saw that your process reports roughly 85% lower carbon emissions, more than 90% less waste, and up to 40% higher energy density. How does the technology actually achieve that?

Dr. Athan: Conventional recycling generally takes the lead sulfate in an end-of-life battery, chemically reduces it to lead metal, and then the battery industry oxidizes that metal again to make lead oxide. I compare it to climbing a mountain and then coming back down the other side. Both stages require energy, equipment, time, and money.

Our approach creates a tunnel through that mountain. We regenerate the active material rather than first reducing it to metal and then oxidizing it again. We form a metal-organic framework, which can then be thermally activated to produce lead oxide. That material has different surface area, porosity, and crystal structure from conventional oxide. Those differences allow us to engineer properties such as power or stability rather than accepting the largely one-size-fits-all oxide traditionally used by the industry.

So can you tune the recycled material for different battery applications?

Dr. Athan: Yes, and that’s one of the aspects I find most exciting. Lead oxide can exist in different crystal structures, but traditional manufacturing does not give the industry very precise control over which structures it produces. Our process gives us much more control.

For example, we can target a tetragonal form when higher power is desirable, such as in automotive applications. Other structures can offer greater stability and deeper discharge characteristics that are useful for renewable-energy storage. Ultimately, we can target individual structures or particular ratios, giving manufacturers an active material that can potentially be tailored to the job the battery needs to perform.

How does the economics compare with conventional lead recycling and oxide production?

Dr. Athan: It depends heavily on where the technology is being deployed. A greenfield plant has very different economics from an existing recycler that already owns a furnace. If you were building a new facility and choosing between our route and a traditional route for producing oxide, our specific solution can come in at roughly one-sixth to one-seventh of the capital requirement when the associated furnace, energy, and waste savings are considered.

For an existing recycler, however, adding our technology creates a different business question. They gain a lower environmental footprint, but instead of producing only lead metal, they now have a battery-active oxide that needs a customer. At that point, the technical problem starts becoming a commercial one: recyclers and battery manufacturers need agreements and business models that allow the higher-value recycled material to move through the supply chain.

Can battery manufacturers use your material directly, or does it need further refining?

Dr. Athan: It can be introduced into an existing battery-manufacturing process, but the more interesting question is whether we should simply force a next-generation material into a process designed decades ago. We have tested our oxide with several partners, and one of our strongest results came from blending roughly 20–25% of our material with conventional oxide, where we observed around a 40% improvement.

That raises several possibilities. There may be a sweet spot where different particle sizes work particularly well together, or performance may plateau after a certain percentage. Alternatively, using 100% of our material may require manufacturers to adjust how they handle moisture, drying, or other processing conditions. That’s why battery validation matters: we’re not only asking whether the material works, but how manufacturers can extract the greatest value from it.

Moving from laboratory chemistry to tonnes per hour is usually where promising recycling technologies struggle. What went wrong during your scale-up?

Dr. Athan: Almost everything becomes different once you stop working with pure laboratory chemicals and start processing real end-of-life batteries. Our chemistry worked very well with lead sulfate in the lab. But actual battery paste contains variable material from different batteries, different states of discharge, different failure modes, and different impurities.

We eventually realized the original process could not tolerate that variability. There was too much water, the chemistry attracted impurities we didn’t want, and the feedstock changed too much. Instead of trying to force the laboratory process to work, we redesigned the front end. We developed our own process that converts the sulfate into a homogenized oxide before it enters the chemistry that creates the metal-organic framework. That front-end solution became a separate patent family and removed the need for some of the large, expensive equipment we originally thought might be necessary.

You mentioned that limited resources actually helped solve that scale-up problem. Why?

Dr. Athan: If somebody had given us $10 million or $20 million at the beginning and told us to solve the problem, there is a real possibility we would simply have spent that money trying to make conventional equipment work. Sometimes money encourages you to buy the obvious solution rather than rethink the problem.

We couldn’t afford to do that. We didn’t have the capital to buy an off-the-shelf desulfurizer and crystallizer, so we had to develop something fundamentally different. We started grinding rather than relying on the conventional mixing approach and eliminated several pieces of large process equipment. Initially, people in the industry didn’t believe it would work. But it gave us the consistent feed material our downstream chemistry needed. Scarcity forced us to solve the underlying process problem instead of spending around it.

Your website refers to high material recovery. How much of a spent lead-acid battery can actually be recovered?

Dr. Athan: For the active material which is equivalent of what you might call black mass. The vast majority is lead-bearing material, primarily lead sulfate, alongside smaller amounts of lead dioxide, lead oxide, and lead. There are also additives such as carbon and barium sulfate and some unwanted metals or other materials.

The unrecovered portion of that active-material stream is around 1% or less. Looking at the lead-acid battery as a whole, only roughly 1–2% should remain unrecovered when you include normal engineering losses. The acid, plastic, and lead components can all be recovered relatively easily, although components such as separators can be more difficult.

Feedstock security is becoming a major concern across battery recycling. How exposed are you to that problem?

Dr. Athan: Lead is unusual because wherever you have people and vehicles, you generally have lead batteries. So physically, the feedstock exists in enormous quantities. In some regions, better recycling infrastructure is desperately needed, meaning there is both an environmental need and an available waste stream.

The difficult part is accessing and moving that feedstock. Lead is hazardous, regulation is strict, cross-border transportation can be difficult, and new facilities face substantial permitting barriers. Our strategy therefore has to be territorial. We need supply-chain structures and partners that already understand how lead moves in a particular market rather than assuming batteries can simply be transported anywhere we want to process them.

Beyond lead, where else could this chemistry take Regenerate?

Dr. Athan: Lead is our immediate commercial focus, but the underlying idea is much broader: take a waste resource and see whether we can remake it into something better than the original material. We’re already exploring related chemistry for zinc. Zinc is available from steel-industry waste and alkaline batteries, and it can potentially be upcycled into materials for emerging zinc-ion and zinc-air batteries.

We’ve also seen evidence that related chemistry can work with resources such as silver, including materials that could be relevant to electrolyzers for hydrogen production. The opportunity we’re looking for is not recycling for recycling’s sake. We want situations where recovering the resource also lets us engineer a higher-value material and create a meaningful environmental and economic benefit.

If we look ten years ahead, how do you expect battery storage and recycling to evolve?

Dr. Athan: Predicting ten years is particularly difficult now because power demand, AI infrastructure, geopolitics, critical materials, and battery technologies are all interacting. But I do expect the world to require more power and more storage. I also expect governments and industries to care increasingly about where resources are refined and whether important materials can be kept within domestic or regional supply chains.

That makes recycling more strategic. My hope is that recycling gradually stops being viewed simply as an end-of-life treatment and starts becoming part of manufacturing. Instead of recovering a material and trying to make it equivalent to what came before, we should ask whether recycling can produce a better material. That’s the space where I see Regenerate: using circular chemistry to turn waste streams into next-generation resources for energy storage.mass. Without AI, that kind of work could take months in a laboratory. With AI, we believe it could be done in about 24 hours, which would make recycling far more responsive to battery manufacturers’ needs.

Meet our Interviewer – Anusha Srivastava, Senior Research Analyst at GreyB

Anusha Srivastava

Anusha Srivastava, Senior Research Analyst

Technology and business consulting professional helping organizations solve innovation and growth challenges through market intelligence, technology scouting, competitive analysis, and strategic research across industries including telecom, FMCG, packaging, healthcare, sustainability, and emerging technologies.

Want to find other scalable startups working on battery recycling and waste management processes? Please fill out the form below to contact our experts.

Get in touch

Get in touch

Please share your query below

Share This Article:

Related Articles

Table of Contents

More Insights For You

This Startup’s Melt fusion Process Could Reduce Dependence on China’s Battery Supply Chain

China controls more than 98% of global LFP cathode active-material production. For manufacturers outside that ecosystem, the options are limited to either importing finished cathode material or reproducing a supply

This Startup is Turning Lithium ion Batteries into Reusable Minerals

As per the Environmental Services Association, in the UK alone, 22,000 tonnes of batteries are discarded each year, and only 45% are properly recycled. This results in over 1,200 fires

This Startup has A New Approach to Localized Cooling for Next Generation Electronics

NVIDIA’s H100 AI accelerator generates over 700W of heat per chip. A single Blackwell Ultra rack draws up to 140kW, equivalent to ~100 household kettles running simultaneously. Air cooling, the

Electric Vehicle Innovations

Electric vehicle development is reaching a point where simply adding more battery capacity is no longer enough. In many cases, the limitation is not the amount of energy a system

solid state battery companies

Samsung captured the spotlight by announcing its groundbreaking solid-state battery technology at the InterBattery conference held on November 5, 2023, in Seoul, South Korea. This next-generation battery is set to

automotive OEMs
V2X

Over 100,000 patent families have been declared essential to 4G and 5G standards. A growing share of licensing campaigns built on that number are now targeting vehicle manufacturers. The shift

Facing A Roadblock On Your Project?

Our Experts Are Here To Help.